How to use the every-stop checklist
The checklist runs in the order a good stop does. Safety and a look at the pool come first, because a green tinge, a low water level or a broken lid changes the plan. Test the water before you brush and vacuum, so the reading reflects the water and not the cloud you just stirred up. Dose next and let the pump circulate it while you clean. Equipment checks come after cleaning, when you can see the filter pressure with clean baskets. The close-out is where most complaints are born or prevented: the gate, the pump, the photo and the report.
Give every new tech this list on day one and ride along until they follow it without looking. A standard checklist is how a route keeps the same quality when you are not the one at every pool.
What to record on the weekly pool log sheet
One sheet per pool covers about three months of weekly visits. Log the readings you take, the chemicals you add with amounts, the filter pressure and who did the stop. Add a note for anything that changed: a new leak, a tree dropping leaves, a customer request.
Readings
Free chlorine and pH on every visit, and total alkalinity on most. Combined chlorine when the water smells or looks dull. CYA, calcium hardness and salt once a month, or after rain dilutes the pool or you drain some water. The free chlorine you need depends on CYA, so log CYA where you can see it next to every FC reading.
Chemicals added
Write the product and amount: “liquid chlorine 12.5%, 1 gal” or “acid, 32 fl oz”. If you bill chemicals on top of the rate, the log is what you bill from. If chemicals are included, it is how you find the pools that cost you money.
Filter pressure
Write down the clean pressure at the top of the sheet after each filter clean. When a reading is 8 to 10 psi above it, clean the filter or backwash. A sudden drop can mean a clogged basket, a closed valve or an air leak.
Reading the log for trends
A single reading tells you what to add today. Four weeks of readings tell you why. Chlorine that is gone faster every week points to rising CYA from tablets, phosphates feeding early algae, or more sun after a tree came down. pH that climbs every week on a salt pool is normal, but if it climbs fast, alkalinity is probably too high. Use the chlorine calculator for routine doses and the LSI calculator to check whether the water is corrosive or scaling.
The checklist in the ShockRoute tech app
In ShockRoute, your checklist is in the tech app at every stop. You set the steps once in settings, with a Spanish name for each step if your techs use the app in Spanish. Techs tick the steps as they go, and the ticked steps show on the customer's service report under “What we did”, next to the readings, the doses and the photos. It works without signal and syncs when the phone is back online.
For repairs and one-off jobs, work orders carry their own checklist. Mark a step as photo required and the tech can't finish the job until the photo is in, so a filter clean or a cell replacement always comes back with proof. Every reading and dose is saved on the customer's Readings tab, pool by pool, so the trends are there without the paper.
Starting a route? Put this checklist next to the pool service contract template and the invoice template.