Skip to content

Pool shock calculator

How much shock to add to your pool. Pick liquid chlorine, cal-hypo or dichlor, enter your gallons and CYA, and get the dose to reach SLAM level, or breakpoint if you have combined chlorine.

SLAM level at this CYA: 20 ppm.
Total chlorine minus free chlorine. Needed for breakpoint.
Add Liquid chlorine 12.5%2 gal 49 fl ozAbout 3 one-gallon jugsRaises free chlorine from 1 to 20 ppm, the SLAM level for CYA 50.

Add at dusk with the pump running, in front of a return. Retest in an hour and top back up to 20 ppm until the pool clears. Never mix chlorine products with each other or with acid.

How the pool shock calculator works

Shock is just a lot of chlorine at once. What counts is how high free chlorine goes, and that target depends on your CYA (stabilizer). CYA holds chlorine in reserve and protects it from the sun, but it also makes it weaker. So a pool at 80 ppm CYA needs far more chlorine to kill algae than a pool at 30 ppm.

SLAM level. The calculator sets the target at 40% of your CYA, never below 10 ppm. That is the level the SLAM method (shock, level and maintain) holds until the pool passes three tests: the water is clear, combined chlorine is 0.5 ppm or less, and the pool loses 1 ppm or less of free chlorine overnight.

Breakpoint. If the water smells of chlorine, the culprit is combined chlorine (chloramines). Pick breakpoint and enter combined chlorine, and the target becomes 10 times that number. It works for a clean pool with a chloramine problem. For algae, use SLAM.

The dose. Each product has a standard strength: the amount that raises 10,000 gallons by 1 ppm. That is 10.7 fl oz of 12.5% liquid chlorine, 12.8 fl oz of 10% liquid, 2.0 oz of 65% cal-hypo, 1.8 oz of 73% cal-hypo or 2.4 oz of dichlor. The calculator multiplies that by the ppm you need and by your gallons divided by 10,000, then rounds up to whole jugs or 1 lb bags so you know what to buy.

Not sure of your gallons? Use the pool volume calculator first. For everyday dosing, the chlorine calculator uses your normal target instead of the shock level.

Pool shock calculator questions

How much shock do I need for my pool?

It depends on gallons, the free chlorine already in the water and your CYA. A full shock (SLAM) raises free chlorine to about 40% of your CYA, never below 10 ppm. A 20,000 gallon pool at 50 ppm CYA and 2 ppm free chlorine needs about 3 gallons of 12.5% liquid chlorine to reach 20 ppm.

What is the SLAM level for my CYA?

About 40% of CYA. At 30 ppm CYA that is 12 ppm, at 50 ppm it is 20 ppm and at 80 ppm it is 32 ppm. The higher your stabilizer, the more chlorine it takes to kill algae, which is why a pool with very high CYA can be hard to clear without a partial drain.

What is breakpoint chlorination?

Breakpoint is the point where you have added enough chlorine to burn off all the combined chlorine (chloramines). The rule of thumb is free chlorine at 10 times the combined chlorine. With 0.8 ppm combined chlorine, raise free chlorine to 8 ppm. Combined chlorine is total chlorine minus free chlorine from a DPD or FAS-DPD test.

Which shock is best: liquid chlorine, cal-hypo or dichlor?

Liquid chlorine is the cleanest choice for a full shock because it adds nothing but chlorine and a little salt. Cal-hypo adds calcium, about 0.7 ppm of hardness per 1 ppm of chlorine. Dichlor adds about 0.9 ppm of CYA per 1 ppm of chlorine, so a SLAM with dichlor can raise CYA by 15 ppm or more in one go.

Should I shock at night?

Yes. Sunlight burns off unprotected chlorine quickly, so adding shock at dusk gives it the whole night to work. Run the pump, brush the walls and retest in the morning.

How long do I keep the pool at shock level?

For algae, hold the SLAM level until the water is clear, combined chlorine is 0.5 ppm or less, and the pool loses no more than 1 ppm of free chlorine overnight. That can take one day or a week. Retest and top up every few hours while you can.

Can I swim after shocking?

Wait until free chlorine drops back to your normal range. Most pros use about 10 ppm as the most they will swim in, and only when CYA is 30 ppm or higher. Follow the product label.

Run this math on every stop.

ShockRoute does the dosing for each pool's gallons in the tech app, logs it, and prices it from your supply costs. Free up to 10 pools.