Most pricing mistakes in pool service come from the same place: setting a rate by matching the competition, then never checking what each pool actually costs to service. Two pools at the same rate can make very different money. One sits two minutes from your last stop with no trees; the other is across town under an oak, with a screen enclosure and a salt cell that needs attention. Price the work, not the zip code.
This guide does not quote national average prices. Rates swing widely between markets, and an average from somewhere else tells you nothing about your costs. Instead, it shows you how to build a price you can defend.
Pool service pricing models
Almost every pool company uses one of three models, or a mix.
Flat monthly rate
One price per month for weekly service. It is the most common model for residential routes because it is simple for customers and gives you steady revenue. Months with five service days balance against the shorter ones over a year, so you price on the year: 52 visits divided by 12 months is about 4.33 visits a month.
Per visit
A price for each visit, billed for the visits you made. It fits biweekly service, seasonal pools, vacation rentals that need a visit between guests, and one-time cleanups. It is also the fairest model when the visit count changes month to month.
Flat rate plus chemicals
A monthly or per-visit service rate, with chemicals billed on top at your price. This protects your margin on pools that use a lot of chlorine or acid, and it makes the cost of a problem pool visible to the customer.
ShockRoute bills all three. Each customer has a billing type (monthly flat, per visit, or rate plus chemicals) and the monthly invoice is built from it, with chemicals priced from your own price book when they are billed separately. See billing and payments.
Chemicals included or extra
This is the biggest pricing decision you will make, and both answers work if you price for them.
| Chemicals included | Chemicals billed separately |
|---|---|
| One predictable bill; easy to sell | Bill changes month to month |
| You carry the risk on heavy-use pools | Customer pays for what the pool uses |
| Price must include a chemical allowance | Lower base rate, chemicals marked up |
| Rate review needed when chemical prices rise | Chemical price changes pass through |
A common middle path: include routine chlorine and acid in the monthly rate, and bill stabilizer, salt, phosphate removers and algae treatments as extras. Whatever you choose, write it in the service agreement so there is no argument later. Our pool service contract template has a section for it.
What drives the cost of a pool
These are the factors that make one pool cost more than another. Every one of them belongs in your price.
- Time on site. The single biggest cost. Brushing, vacuuming, baskets, testing and dosing add up differently on every pool.
- Drive time and miles. Time between stops is paid time you cannot bill directly. A pool in a dense cluster is worth more to you than the same pool on its own.
- Pool size and volume. More water needs more chemicals and more brushing. Use the pool volume calculator rather than a guess.
- Screen enclosure or open pool. Open pools under trees catch leaves, pollen and debris. Screened pools are usually faster.
- Trees and landscaping. Heavy leaf fall can double your time in the fall.
- Chlorine or salt. Salt pools use fewer chlorine purchases but need cell cleaning and salt top-ups.
- Equipment. Cartridge, sand or DE filters, older pumps, automation and heaters all change what a visit involves.
- Spa, water features and access. An attached spa, a fountain, locked gates or a dog in the yard all take time.
- Bather load and use. Rentals and busy family pools demand more chlorine than a pool no one swims in.
How to find your floor price
Your floor price is the lowest monthly rate at which a pool still earns your target margin. Quote at or above it, never below. Here is the math, step by step:
- Minutes per visit. Time on site plus the drive from the previous stop.
- Labor cost per visit. Minutes divided by 60, times what an hour of labor costs you (wages, payroll taxes, or what you need to pay yourself).
- Vehicle cost per visit. Miles times your cost per mile (fuel, maintenance, insurance, depreciation).
- Visits per month. 4.33 for weekly service.
- Chemicals per month, if they are included in the rate.
- Overhead share. Your monthly fixed costs (insurance, phone, software, test reagents) divided by your number of pools.
- Margin. Divide total monthly cost by one minus your target margin. For a 25% margin, divide by 0.75.
Here is a worked example. The inputs are assumptions for illustration, not a market rate. Use your own.
| Line | How | Per month |
|---|---|---|
| Labor | 35 min on site + 8 min drive, at $30/hour, 4.33 visits | $93.17 |
| Vehicle | 3 miles a visit at $0.70/mile | $9.10 |
| Chemicals | Typical month for this pool | $25.00 |
| Overhead share | Insurance, phone, software, supplies, spread per pool | $10.00 |
| Cost per month | $137.27 | |
| Price at 25% margin | Cost divided by 0.75 | $183.02 |
| Floor price | Rounded up to the next $5 | $185 |
In this example, quoting this pool at less than $185 a month earns less than a 25% margin. If the going rate in your area is well below that, the answer is not to match it. Look for ways to bring the cost down (tighter stops, chemicals billed separately) or pass on the pool.
The pool service pricing calculator does this math in your browser with your own numbers.
Check it against real data. Estimates drift. After a month of service, compare your guess with the real minutes on site and the real chemical cost. That is where the money hides.
Pricing add-on work
Price these as separate jobs, never inside the weekly rate:
- Filter cleans. Cartridge cleans and DE filter teardowns, on a schedule or on request.
- Green-to-clean recoveries. Several visits, heavy chemical use and a lot of brushing. Price per job, with chemicals extra.
- Salt cell cleaning and salt top-ups.
- Equipment repair and replacement, if you hold the license your state requires. See the licensing section of our startup guide.
- Opening and closing in markets with a swim season.
Quote add-ons in writing before you start and get approval. In ShockRoute you send a quote as a link the customer opens, then run the job as a work order. Each work order type carries its own price, time and checklist, tracks parts, and can repeat on a schedule, such as a filter clean every few months.
When and how to raise rates
Customers expect prices to change. What they dislike is surprise. A calm, yearly review with written notice keeps both your margin and your customers.
When to raise a rate
- Once a year for every account, at the same time each year
- When a pool’s real cost puts it below your target margin
- When chemical or fuel prices rise for a sustained period
- When the customer adds work, such as a new spa or heavier tree cover
How to raise it
- Find the pools that are below your margin, using real time on site, drive and chemical costs.
- Set each new rate so the pool meets your target margin.
- Give at least 30 days of written notice and start the new rate on the first of a month.
- Keep the letter short: old rate, new rate, start date, one honest reason, thank you.
- Apply the new rate to the next invoice after the start date.
ShockRoute does most of this for you. The profit per pool screen uses each pool’s logged time on site, estimated drive from the stop before it and chemical cost, against labor and mileage rates you set and a target margin (25% unless you change it). It marks the pools that lose money or miss the target and suggests a rate for each, rounded up to the next $5. Apply the new rates in bulk, and ShockRoute drafts a rate letter for each customer with a start date on the first of the month at least 30 days out. Nothing is sent to customers automatically; you review and send. Drive distance is an estimate from map points, not a turn-by-turn route.
Commercial and HOA pool pricing
Commercial pools are a different job. HOAs, apartments, hotels and gyms usually need more visits per week, heavier chemical use, written chemical logs, a certified operator, and a certificate of insurance naming the property. Some states require public pools to be serviced by a certified technician. In Florida, for example, a nationally recognized certification such as the CPO satisfies that rule (see our startup guide).
- Bid on time. Count the visits a week the property and the health code need, and the minutes each takes.
- Separate chemicals where the contract allows. Commercial chemical use swings with weather and bather load.
- Price the paperwork. Logs, inspections and board reports take time.
- Set response terms. How fast you respond to a cloudy pool or a failed inspection, and what an extra visit costs.
- Spell out repairs. Who approves them, the dollar amount you can spend without approval, and your labor rate.
- Agree payment terms. Many properties pay on invoice terms. Factor that into your cash flow.
Commercial accounts pay more and stay longer when you run them well. They also punish a missed visit. Win a few, run them perfectly, and use them as references for the next bid.